rev c pol06 - 12t series 6a output curre nt rating dc/dc open frame converter single output 1/9/2018 wall industries, inc. ? 37 industrial drive, exeter, nh 03833 ? tel: 603 - 778 - 2300 ? toll free: 888 - 597 - 9255 ? fax 603 - 778 - 9797 website: www.wallindustries.com ? e - mail: sales@wallindustries.com page 1 of 5 smd package sip vertical package sip horizontal package size: 0.80in x 0.45in x 0.25in size: 0.90in x 0.40in x 0.23in size: 0.90in x 0.40in x 0.40in options features ? smd or sip package type available ? vertical or horizontal mounting for sip p ackage ? remote control positive or negative logic ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? telecom/datacom ? industry control system ? distributed power architectures ? semiconductor equipment ? microprocessor power applications the pol06 - 12t series of dc dc open frame converters o ffers up to 6a of output current. this series has an input voltage range of 8.3~13.2 (14)vdc and programmable output voltage via external resistor ranging from 0.75~5vdc. no minimum load is required and there is a fixed switching frequency for this series. pol06 - 12t has many options available including an smd or sip package type, vertical or horizontal mounting for sip package, or positive or negative logic. this series has over load, over temperature, and short circuit protection, is rohs ii & reach, and h as ul60950 - 1, en60950 - 1, & iec60950 - 1 safety approvals. please call factory for order details. model selection table model number input voltage range output voltage output current @full load efficiency package type remote on/off pols06 - 12t 12vdc (8.3 ~14vdc) 0.75~5vdc 6a 89% smd posi tive pols06 - 12t - p nega tive polt06 - 12t 12vdc (8.3~13.2vdc) 0.75~5vdc 6a 89% sip vertical positive polt06 - 12t - p negative polt06 - 12ta sip horizontal positive polt06 - 12ta - p negative
rev c pol06 - 12t series 6a output curre nt rating dc/dc open frame converter single output 1/9/2018 wall industries, inc. ? 37 industrial drive, exeter, nh 03833 ? tel: 603 - 778 - 2300 ? toll free: 888 - 597 - 9255 ? fax 603 - 778 - 9797 website: www.wallindustries.com ? e - mail: sales@wallindustries.com page 2 of 5 specificati ons all specifications are based on 25c, nominal input voltage, and maximum output current unless otherwise noted. we reserve the right to change specifications based on technological advances. specification test conditions min typ max unit input speci fications input voltage range vout(set) 3.63vdc 6 ms output voltage overshoot - startup vin=vin(min.) to vin(max.) at full load; % of vout(set) 1.0 % temperature coefficient - 0.4 +0.4 %/ o c remote on/off control (6) negative logic (option ) dc/dc on open or 0~0.3vdc dc/dc off 2.5vdc~vin(max.) positive logic ( standard ) dc/dc on open or (vin - 4)~vin(max.) dc/dc off 0~0.3vdc input current of ctrl pin 0.1 1.0 ma remote off input current 1.2 ma turn - on delay time case 1 (7) case 2 (8) 3 ms protectio n short circuit protection continuous, automatic recovery over load protection % of iout 200 % over temperature protection 140 o c environmental specifications operating ambient temperature with derating - 40 +85 o c storage temperature - 55 +12 5 o c thermal shock mil - std - 801f relative humidity non - condensing 5 95 %rh vibration mil - std - 810f lead - free reflow solder process ipc j - std - 020d moisture sensitivity level (msl) ipc j - std - 033b level 2a mtbf mil - hdbk - 217f, full load 9,277,000 ho urs
rev c pol06 - 12t series 6a output curre nt rating dc/dc open frame converter single output 1/9/2018 wall industries, inc. ? 37 industrial drive, exeter, nh 03833 ? tel: 603 - 778 - 2300 ? toll free: 888 - 597 - 9255 ? fax 603 - 778 - 9797 website: www.wallindustries.com ? e - mail: sales@wallindustries.com page 3 of 5 specifications all specifications are based on 25c, nominal input voltage, and maximum output current unless otherwise noted. we reserve the right to change specifications based on technological advances. specification test conditions min t yp max unit general specifications efficiency 3.3vdc@full load 89 % switching frequency 270 300 330 khz physical specifications weight 0.1oz (2.8g) dimensions (l x w x h) smd package 0.80in x 0.45in x 0.25in (20.3mm x 11.4mm x 6.4mm) vertical sip package 0.90in x 0.4 0 in x 0.23in (22.9mm x 10.2mm x 5.9mm) horizontal sip package 0.90in x 0.40in x 0.40in (22.9mm x 10.2mm x 10.1mm) safety & emc characteristics safety approvals ul60950 - 1 en60950 - 1 iec60950 - 1 notes (1) it?s necessary to equip t he external input capacitors at the input of the module. the capacitors should connect as close as possible to the input terminals that ensuring module stability. the external c in is 2pcs of 47 f ceramic capacitors at least. (2) output voltage programmable fro m 0.7525v to 5v by connecting a single resistor (shown as trim table) between the trim and gnd pins of the module. to calculate the value of the resistor rtrim for a particular output voltage vout use the following equation: (3) test by minimum input and constant resistive load. (4) with a 1 f mlcc & a 10 f t/c (5) with 2pcs of 150 f polymer capacitors (6) remote on/off referred to ? vin pin positive logic: on/off is open collector/drain logic input negative logic: on/off pin is open collector/drain logic input with ex ternal pull - up resistor (7) case 1: on/off input is set to logic low (module on) and then input power is applied (delay from instant at which vin=vin(min .) until vout=10% of vout(set)) (8) case 2: input power is applied for at least one second and then the on/off input is set to logic low (delay from instant at which von/off=0.3vdc until vout=10% of vout(set)) caution: this power module is not internally fused. an input line fuse must always be used. characteristic curves pols06 - 12t, vout=3.3v deratin g curve pols06 - 12t, vout=3.3v efficiency vs. input voltage pols06 - 12t, vout=3.3v efficiency vs. output load
rev c pol06 - 12t series 6a output curre nt rating dc/dc open frame converter single output 1/9/2018 wall industries, inc. ? 37 industrial drive, exeter, nh 03833 ? tel: 603 - 778 - 2300 ? toll free: 888 - 597 - 9255 ? fax 603 - 778 - 9797 website: www.wallindustries.com ? e - mail: sales@wallindustries.com page 4 of 5 mechanical drawing s smd package pin connection pin define 1 ctrl 2 +vout 3 trim 4 gnd 5 +vin sip vertical package pin connection pin define 1 +vout 2 trim 3 gnd 4 +vin 5 ctrl sip horizontal package pin connection pin define 1 +vout 2 trim 3 gnd 4 +vin 5 ctrl 1. all dimensions in inch (mm ) 2. tolerance: x.xx0.02 (x.x0.5) x.xxx0.01 (x.xx0.25) 3. pin pitch tolerance 0.01 (0.25) 4. pin dimension tolerance 0.004(0.1)
rev c pol06 - 12t series 6a output curre nt rating dc/dc open frame converter single output 1/9/2018 wall industries, inc. ? 37 industrial drive, exeter, nh 03833 ? tel: 603 - 778 - 2300 ? toll free: 888 - 597 - 9255 ? fax 603 - 778 - 9797 website: www.wallindustries.com ? e - mail: sales@wallindustries.com page 5 of 5 model number setup polt 06 - 12 ta p series name output current input voltage package remote on/off & pin length pols: smd type 06: 6a 12: 8.3~14vdc t: no assembly none: positiv e logic polt: sip type t: vertical mouting sip p: negativ e logic ta: horizontal mounting sip company informatio n wall industries, inc. has created custom and modified units for over 50 years. our in - house research and development engineers will provide a solution that exceeds your performance requirements on - time and on budget. our iso9001 - 2008 certification is just one example of our commitment to producing a high quality, well - documented product for our customers. our past projects dem onstrate our commitment to you, our customer. wall industries, inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. we will continue to provide ongoing support for your p roject above and beyond the design and production phases. give us a call today to discuss your future projects. contact wall industries for further information: phone: ? (603)778- 2300 toll free: ? (888)597 - 9255 fax: ? (603)778- 9797 e - mail: sales@wallindustries.com web: www.wallindustries.com address: 37 industrial drive exeter, nh 03833
|
